(perlong medical brand - JP2000 super-thin multi- parameter monitor)
Ecg monitor (patient monitor, multi-parameter monitor) because of its unique function, efficient work efficiency makes the instrument in hospital more widely used, the popularity of ecg monitor is a timely monitoring patient vital signs and provide important basis for clinical important medical equipment. If it is not properly used not only for the patient can't be accurately effective monitoring, even can cause damage to the instrument, the instrument can't normal use. Therefore, ecg monitor when use need to pay attention to want to use the methods, the following perlong medical introduce you to monitor ecg, blood pressure and blood oxygen measurement in matters that should pay attention to:
(1) the pretreatment of the skin is very important, first of all to the patient's skin cleaning. First used in the measurement of ethanol patients area of surface cleaning, to skin clean the purpose is to remove the human body skin cutin layer and sweat be soiled, prevent electrode piece of bad contact. You have to be careful with ethanol in the volatile dry clean only after they will electrode plate stick this part, in order to avoid the electrode slice off.
(2) due to the usage of the electrode plate is very large, long-term application will fall off, also can affect the accuracy and monitoring quality. So click bill should be replaced periodically once (suggest 3-4 days).
(3) will lead wires shall be secured told patients and families don't pull electrode wire and cable.
(4) if the monitoring found that special abnormalities, should ask professional inspection, diagnosis, to ensure accuracy.
Second, the oxygen measurement problems needing attention:
(1) blood oxygen probe should try to avoid using strong, if can't avoid, can use the opaque cloth cover the oxygen probe, in order to avoid the light to the measurement of blood oxygen produce interference which can lead to inaccurate measurement.
(2) the right operation method should be probe line on the back side, pay attention to patients body warm, remove nail polish, not will be clipped to tie a blood pressure cuff belt body so that patients in the measurement of blood pressure cuffs air pressure arm will affect oxygen measurement.
(3) if you can see GuanLiang luminescence, and can't measure blood oxygen value, can use alcohol sponge or soft cloth to wipe luminous tube and receiving tube.
Third, blood pressure measurement problems should be paid attention to:
(1) blood pressure measurement should be used with normal sleeve cuffs, squeeze out the air; Sleeve belt bind should stretch the right.
(2) the cuffs unfolds in the patient's elbow should be winding of 1 ~ 2 cm place, elastic degree can be inserted to 1 ~ 2 refers to the advisable. Too loose can lead to pressure on the high side, Bind may cause pressure on the low side, also can make patients feel uncomfortable, but also affects the patient's arm blood pressure recovery.
(3) the sleeve band and heart level position height difference, sleeve with inappropriate, leak, and sleeve with connecting pipe joint leakage, etc can cause blood pressure measured value is not allowed. Sleeve strap position as far as possible with the heart at the same level.
(4) don't bit body or traumatic physical measurement of blood pressure, avoid to cause blood backflow or wound bleeding.
(5) in the daily monitoring without frequent measurement of blood pressure, blood pressure measurement should be changed to manual mode, avoid to affect instrument life. Condition allows, the best interval 6 ~ 8 h change a monitoring site. To prevent the continuous monitoring of the same place, give patients caused unwell and skin damage.
After above the ecg monitor in use process should pay attention to the introduction of matters, I believe you the ecg monitor use has a lot of understanding, if you want to know more information of ecg monitor, you can land perlong medical's official website to see to understand, or call page free consultation telephone consultation.
没有评论:
发表评论