2012年1月15日星期日

Introduction to X-ray Detectors(1)


The quest of X-ray astronomy is to be able to detect a weak source against a fairly strong background. Principally because of the relative weakness of the sources, integrating detectors (such as film) have not found a place in cosmic X-ray astronomy. Source detection is done on a photon-by-photon basis. A flux of one photon per square centimeter per second (in the 1-10 keV range) observed at Earth constitutes a bright cosmic X-ray source!
      X-rays, just like any other kind of light, can be thought of as either electromagnetic waves or as massless particles. Both ways are right -- this is known as duality. The way we use to think about X-rays in a given context is the way that makes the problem the easiest. Thus, when we talk about optics or dispersive spectrometers we will talk about waves, because in these cases we need so see how the waves will interact with surfaces and interfaces, and how they will combine and interfere with each other. When we speak of non-dispersive spectrometers, however, it makes sense to talk about particles of light, called photons.
      So how do we measure the energy of an X-ray photon? We need the X-ray to give all its energy to some kind of detector. That energy will change something in the detector and, by measuring that change, we can determine the energy of the incident X-ray. X-rays interact strongly with electrons. You may know that lead is good at blocking X-rays. Well, that's because each lead atom has 82 electrons and lead is a metal, so the atoms are packed together pretty close. Lead stops X-rays because it has a large electron density.

What is high blood pressure?


       What it is.High blood pressure occurs when small blood vessels in the body narrow. The narrowed path causes the blood to exert too much pressure against the vessel walls. This makes the heart work harder. Over time, high blood pressure can enlarge and damage the heart. Having high blood pressure increases your risk for developing heart disease, stroke, kidney disease, vision loss, and other serious health problems.
      How it's diagnosed.The only way to know if you have high blood pressure is to get your blood pressure checked. Your doctor or healthcare provider will measure your blood pressure using a blood pressure monitor called a sphygmomanometer. This is a painless test.
      How it's treated.If you have high blood pressure, you may need to make changes to your lifestyle as part of your treatment. These can include any of the following that may apply to you: losing weight, eating a healthier diet, limiting alcohol, quitting smoking, and exercising regularly. Your doctor may also prescribe medicines to help lower your blood pressure.
      Your heart pumps blood though blood vessels to all parts of your body. Your blood pressure is the force your blood exerts against the walls of your blood vessels. The pressure depends on how forcefully your heart pumps and how wide or relaxed your blood vessels are. The more narrow your vessels are, the higher the blood pressure is inside them. The higher your blood pressure, the harder your heart has to work to pump your blood.
      Blood pressure goes up and down naturally throughout the day. When you're relaxed or sleeping, your blood pressure goes down. When you're active or exercising, your blood pressure rises. On average, during most of your waking hours, your blood pressure stays about the same. When it goes up to a certain level and stays up, you have high blood pressure or what doctors call hypertension.
      To lower your blood pressure and reduce your risk for serious health problems, you need to understand what high blood pressure is, how doctors diagnose and treat it, and what steps you might take to prevent it. You've come to the right place to get answers to the questions that you have about high blood pressure.

2012年1月12日星期四

Image fusion wil promote medical image development


    From PET/CT developed in 2003, medical image has been in the trend of fusion continually. As one of the fastest discipline, in recent several years, radiation, ultrasound and nuclear medicine have achieved the rapid development, but there are less and less reling on a single imaging technology to diagnose and it more depends on multiple imaging results to observe and compare in different image, so that get comprehensive image diagnosis result.


      In past, we want to the fusion, now we are doing fusion and it is fused in the future. At present, comprehensive image is more and more important and fuse different image advantage and improve the comprehensive level of subject and increase medical imaging competitiveness and it is good for promote sustainable development of medical image industry.

     Recently, fusion trend of medical image has been obvious gradually and it is less and less reling on a single imaging examination technology to make the diagnosis. In addition, medical image fusion has not only meet itself development needs and meet medical clinical diagnosis demands but also it can observe and compare and analyse in different images so that it can provide with image information of different angle and so make the correct diagnosis.



      Medical image fusion is that medical information fusion and information fusion technology is applied in medical imaging fields. In the other words, using computer technology do digital integrated treatment for image information obtained from various imaging examination.


      Image fusion need better fusion, including all kinds of medical imaging diagnostic technology, such as x-rays, ultrasound, nuclear science, optical and play different image technology advantage fully and make up for the shortage of single check imaging. Fusion technology can be devide into two parts: One is belong to diagnosis and the other exists for treatment. As the diagnosis of fusion technology, it appears vascular Computed Tomography, Vascular MR; On treatment, there are intervention study and ultrasound doing fusing; Even, the X-ray, ultrasound and magnetic resonance imaging (mri) together for treatment.


      But if medical fusion want to get breakthrough development, it needs to be established in the digital network. Data network provide with technology method and technology platform for improving the diagnostic efficiency and quality of the diagnosis.


      From the global Global medical imaging market demand to see, the market demands of some developed countries have already been close to the saturated, but in developing countries, especially Latin America, the Middle East, southeast Asia and Africa, their market demands are still large. According to related data, in 2011, the total market of our country medical image equipments achieved 1.82 billion dollars and it is forecasted that it will achieve 2.65 billion dollars.


      China government has promoted basic-level medical development and pull market demand of ultrasound, X-ray machine, DR image equipment, but the future medical development will give priority to the primary medical treatment and senior medical treatment. Therefore, medical imaging equipmenthas increased in the field of high medical treatment.

What Is RDW on a Blood Test? (2)


Normal Reference Range for RDW Blood Test
      Normal RDW values are between 11 and 14 percent, with an optimum RDW value range of 13 percent. When RDW values rise above normal levels, several disorders become suspect. According to the Archives of Internal Medicine, RDW counts may also play an important role in predicting mortality, especially in patients who have cardiovascular disease and cancer. In fact, patients who test higher than the normal reference range on an RDW test may suffer more health risks than those patients whose RDW values are lower.


      Anisocytosis
      Anisocytosis is diagnosed when the RDW levels in a blood test indicate excessively high values of variably shaped red blood cells. In the book "Diagnostic Hematology," author Norman Beck explains that the presence of anisocytosis in a diagnostic blood test is so common that it is often dismissed as a component while making a diagnosis. But, breakthroughs in medicine have shed new light on the importance of anisocytosis during patient evaluation. When anisocytosis is measured against other blood cell values, the high RBC values can help make a better determination of the type of anemia present in a patient.


      Consult Your Health Care Provider
      Blood tests(hematology analyzer machine) and their results are a piece of the overall diagnostic picture and are not meant to be the sole tool used for diagnosis or prognosis of illness. Consulting with your health care provider for a full physical as well as an assessment of symptoms is the best method of understanding your blood test results.

What Is RDW on a Blood Test? (1)


     If your physician has diagnosed you with a type of anemia or iron deficiency (with a hematology analyzer), then somewhere along the line you must have had a blood test that reflected an abnormal RDW count. Your RDW levels, along with a combination of a few other important blood counts, are what help your physician figure out just what type of anemia you have, and why it has manifested. HIP Health Plan of New York explains that there are more than 400 known types of anemia, which can be further broken down into subgroups relating to blood loss, poor red-cell production and the demise of red blood cells.
 

      Related Searches:Blood Lipids
      Blood Panel


      What Does RDW Stand For?
      RDW is the abbreviation for "red blood cell distribution width." According to Lab Tests Online, RDW calculates the varying sizes of red blood cell (RBC) volume in a blood sample. An RDW test is usually performed as part of a CBC, or complete blood count.


      RDW and MCV
      It is virtually impossible to discuss the RDW aspect of a blood test without including MCV, or mean corpuscle value. MCV goes hand in hand with red blood cell distribution width (RDW) in terms of anemia and other hematology disorders, and the values of both are influenced by each other. For instance, low MCV levels in combination with normal RDW may point to chronic disease, while low MCV combined with low RDW can denote iron deficiency. In the same respect, a normal MCV reading in combination with normal RDW may represent a chronic disorder, and normal MCV combined with high RDW can signify a B12 deficiency. Chronolab.com also reveals that when MCV levels are high and RDW is normal, pre-leukemia may be present. Both high MCV and high RDW may mean that a patient is experiencing folate deficiency.


      RDW Calculation
      RDW is calculated by dividing the standard deviation (SD) by the mean corpuscle volume (MCV) and then multiplying that result by 100. The standard deviation represents the volume of erythrocytes or red blood cells that are in the blood smear. According to Beckman Coulter, the equation for the RDW calculation is RDW = SD / MCV x 100.

      Some other details about the RDW we will discuss the next day---Perlong Medical.

2012年1月11日星期三

Is it better X-ray perspective or X-ray scan?


X-ray perspective: X-rays formates on the screen through examination parts of human body;
X-ray scan: X-rays formates on the film through examination parts of human body. Some people think that the cough 
and fever shouldn’t scan because of much radiation, but the X-ray perspective is more safe, But the concept is wrong.
X-ray scan is the first choice of chest examination.
But the radiation of X-ray perspectiveis much more than X-ray scan. According to related experts, the x-ray dosage
 is 20 ~ 30 times of ordinary scan which adult accepts chest examination. But the children don't cooperate with
 because of crying; The doctors usually extend the time of perspective to observe lesions and accepted x-rays 
dosage is more than theory. Therefore, x-rays scan is the best choice of chest check and perspective is a 
beneficial supplement of scan.
Most of hospitals of our country has cancelled perspective
On the one hand, definition of perspective image is far worse than scan and is easy to miss tiny lesions and 
subtle structure; On the other hand, perspective cann't record the image of lesions and is bad for reviewing and 
contrasting. In developed countries of America and Japan, they have eliminated perspective; A few countries have 
decreased the utilization rate that use this method. At present, In some parts of China large hospitals have 
eliminated perspective and so advised that please try to choose scan and not perspective.

X-rays used in medical filed


 X-rays refer to radiation, waves or particles that travel through the air like light or radio signals. Medical x ray energy is high enough that some radiation passes through objects (such as internal organs, body tissues, and clothing) and onto x-ray detectors (such as film or a detector linked to a computer monitor). In general, objects that are more dense (such as bones and calcium deposits) absorb more of the radiation from the x-rays and don't allow as much to pass through them. These objects leave a different image on the detector than less dense objects. Specially trained or experienced physicians can read these images to diagnose medical conditions or injuries.
Medical x-rays are used in many types of examinations and procedures. Some examples include
1. x-ray radiography :to find orthopedic damage, tumors, pneumonias, foreign objects, etc.
2. mammography :to image the internal structures of breasts.
3. CT (computed tomography) :to produce cross-sectional images of the body.
4. Fluoroscopy :to dynamically visualize the body for example to see where to remove plaque from coronary arteries or where to place stents to keep those arteries open.
5. Radiation therapy in cancer treatment.
Medical x-rays have increased the ability to detect disease or injury early enough for a medical problem to be managed, treated, or cured. When applied and performed appropriately, these procedures can improve health and may even save a person’s life.
But x-ray energy also has a small potential to harm living tissue. The most significant risks are:
1. A small increase in the possibility that a person exposed to x-rays will develop cancer later in life.
2. Cataracts and skin burns only at very high levels of radiation exposure and in only very few procedures.
The risk of developing cancer from radiation exposure is generally small, and it depends on at least three factors—the amount of radiation dose, the age at exposure, and the sex of the person exposed:
1. The lifetime risk of cancer increases the larger the dose and the more x-ray exams a patient undergoes.
2. The lifetime risk of cancer is larger for a patient who received x-rays at a younger age than for one who receives them at an older age.
3. Women are at a somewhat higher lifetime risk than men for developing radiation-associated cancer after receiving the same exposures at the same ages.
Although medical x-rays are harmful to human, we can reduce or avoid the harm from them. When you are at examination or procedure, there are some suggestions followed to reduce your radiation risks.
1. Keeping a “medical x-ray history” with the names of your radiological exams or procedures, the dates and places where you had them, and the physicians who referred you for those exams.
2. Making your current healthcare providers aware of your medical x-ray history.
3. Asking your healthcare provider about whether or not alternatives to x-ray exams would allow the provider to make a good assessment or provide appropriate treatment for your medical situation.
4. Providing interpreting physicians and referring physicians with recent x-ray images and radiology reports.